1f Switch Static IP address Configuration
!!! To manage Telnet, SSH Session on a Switch we need IP address
!!! Enter Vlan1 Configuration Mode
Sw1(config)#interface vlan1
Sw1(config-if)#ip address 10.0.0.10 255.0.0.0
Sw1(config-if)#no shutdown
Sw1(config-if)#exit
Sw1(config)#ip default-gateway 10.0.0.100
Verify Command’s
Sw1# show running-config
Sw1# show ip interface vlan1
Sw1# show ip interface brief
Sw1# copy running-config startup-config
Lets Verify SSH Session
!!! Fire up Putty and enter the ip address of Switch and Select SSH as Protocol
!!! Enter Username and Password to authentication
Sw1(config)#show line
!!! “*“ shows that one VTY Session is active
!!! By Default all ports are member of Vlan 1
The connectivity is established between all ports because they are in the same Vlan.
Next Lab 1h Configure VLAN & assign interface
Previous Article
Subscribe to:
Post Comments (Atom)
Share your views...
0 Respones to "1f Switch Static IP address Configuration"
Post a Comment